Events
Improving Aeroengine Cycle Simulations through Early-Stage Component Design with AxSTREAM and NPSS
Learn how a collaboration between the Southwest Research Institute and SoftInWay Inc., attendees will learn how AxSTREAM’s generative design capabilities can be beneficial for NPSS cycle model calculations by utilizing preliminary 1D compressor results
Date: Thursday, April 28th, 2022
Time: 10:00 AM – 11:00 PM EDT
Turbomachinery & Pump Symposia 2022
Dates: September 13 – 15, 2022
Location: Houston, TX, USA
Booth # 1815
Turbine Engine Technology Symposium (TETS) 2022
Dates: September 12 – 15, 2022
Location: Dayton, OH, USA
Booth # 809
Axial and Centrifugal Pump Design Classroom Training
Designing pumps? Interested in increasing efficiency and lowering NPSHr? Then you’ve come to the right place! This hands-on course lasts 5 days (8 hours per day) and is aimed toward mechanical engineers and engineering managers looking to learn or refresh their knowledge on pump design fundamentals and how to use the AxSTREAM® software for the design, analysis, redesign, and optimization of pumps (single- or multi-stage), regardless of the application of interest. Axial, centrifugal, and mixed-flow pumps will be covered. Learn more
Dates: October 3-7
Time: 9:00 AM – 5:30 PM EST
Location: Boston, MA (USA)
Centrifugal Compressor Design Online Training
This online course lasts 6 days ( up to 3 hours per day) and is aimed toward mechanical engineers and engineering managers looking to learn or refresh their knowledge on what centrifugal compressors are, how they work, what their place is in thermodynamic cycles, how to design them and so on. This course also benefits engineers interested in receiving software training (for future use and/or evaluation purposes) on the AxSTREAM Software Platform for the design, analysis, redesign and optimization of centrifugal compressors (single- or multi-stage and integrally-geared configurations). Read More
Dates: June 21, 22, 24, 27, 29, and July 1 (Tues/Wed/Fri/Mon/Wed/Fri)
Time: 10:00 AM – 01:00 PM EDT
Turbo Expo 2022
Dates: June 13th – 17th, 2022
Location: Rotterdam, The Netherlands
Booth # 424
Improving Your Turbomachinery Designs with AxSTREAM-Automated Workflow
Learn how process automation enables a seamless workflow between turbomachinery design in AxSTREAM and high-fidelity CFD analysis in Ansys CFX. You’ll learn how to optimize and validate your results during this upcoming presentation.
Date: Thursday, March 31st, 2022
Time: 11:00 AM – 12:00 PM EDT
Turbomachinery & Pump Symposia 2021
Dates: December 13th – 16th, 2021
Location: Houston, TX
Booth # 1619
Paper Presentation: Cavitation Prediction and Avoidance in Design using Semi-Empirical 1D Models with Fast 3D CFD Validation | Vlad Goldenberg
Paris Space Week
Practical Methodologies and Implementations for Turbomachinery Trimming and Scaling
In this webinar, you will learn when trimming and scaling should be used as well as its limitations to understanding when to utilize clean-sheet design versus scaling strategies. This will be complemented with a software demonstration based on an axial fan example to show how each technique can be put in place and what the outcomes are.
Date: Wednesday, November 10th, 2021
Time: 10:00 AM – 11:00 AM EST
Generative Design for Cutting-Edge Turbomachinery Development
In this webinar, you will learn about what generative design is, how it works in AxSTREAM, and how to implement it into your turbomachinery development workflow. By the end of this session, you’ll have a clear picture of how generative design can help you drastically reduce development time and cost, explore new innovative concepts, and improve design accessibility
Date: Thursday, September 16th, 2021
Time: 10:00 AM – 11:00 AM EST
AxSTREAM.SPACE Workshop – Liquid Rocket Engine Cycle and Component Design
This workshop provides participants with a practical understanding of the design, analysis, and optimization of turbopump components and systems in rocket engines using the AxSTREAM® software platform through 5 online sessions of 3 hours each. Read more
Dates: July 19th-23rd
Schedule:
- Day 1: Rocket Cycles
- Day 2 – Centrifugal Pumps
- Day 3 – Axial Turbines
- Day 4 – Rotor Dynamics
- Day 5 – Secondary Flows in Turbopumps
AIAA Online Short Course – Turbomachinery for Emerging Space Applications: Liquid Rocket Propulsion
The design of liquid rocket engines requires careful considerations to ensure that mission requirements can be met safely. This 24-hour course will cover an introduction to the interdisciplinary design of turbomachinery components within their corresponding systems in the context of liquid rocket engines. The focus will be made on theory and will be illustrated with practical examples throughout the course, including through follow-along portions where attendees will be able to model cycles, perform turbine conceptual design, and more using the AxSTREAM® platform. Relevant topics include rocket cycles, turbine, pump, secondary flow, and rotor dynamics.
Dates: September 22 – October 29, 2021 (6 Weeks, 12 Lectures, 24 Hours)
- Every Wednesday and Friday at 1PM-3PM Eastern Time (all sessions will be recorded and available for replay; course notes will be available for download)
- All students will receive an AIAA Certificate of Completion at the end of the course
AxSTREAM® Platform Workshop – Sustainable Energy Focus
This training is a follow-along workshop focused on providing participants with a high-level understanding of the design, analysis, and optimization of turbomachinery components and systems through the AxSTREAM® platform. Although the skills taught are transferable to other applications, the examples presented will focus on the topic of sustainable (clean) energy. Read more
Dates: October 20th – November 5th
Schedule:
- Day 1-2: Thermodynamic Cycles
- Day 3-4: Centrifugal Pumps & Compressors
- Day 5-6: Axial Turbines
- Day 7-8: Rotor Dynamics
- Day 9-10: Thermal-fluid Systems Modeling
Turbo Expo 2021
Rapid Talk – Paper Presentation | Tuesday, June 8th at 1:15 PM
Transient Analysis of Aircraft Oil Supply System With Fuel-Oil Heat Exchangers During Abrupt Change in Engine Operating Modes
Session: 01-04 Thermal Management and Aero-Engine Oil Systems
Centrifugal Compressor Design Online Training
This hands-on course lasts 4 days (up to 3 hours per day) and is aimed toward mechanical engineers and engineering managers looking to learn or refresh their knowledge (including for evaluation purposes) on how to use the AxSTREAM® software for the design, analysis, redesign and optimization of centrifugal compressors (single- or multi-stage and integrally-geared configurations) as well as fans and blowers. Read more
- Week One: June 15 and 18
- Week Two: June 22 and 25
Radial Turbine Design Online Training
This hands-on course lasts 4 days (up to 3 hours per day) and is aimed toward mechanical engineers and engineering managers looking to learn or refresh their knowledge (including for evaluation purposes) on how to use the AxSTREAM® software for the design, analysis, redesign, and optimization of radial turbines, whether inflow or outflow. Read more
- Week One: July 6 and 9
- Week Two: July 13 and 16
Axial Turbine Design: Online Training Course
This hands-on course lasts 4 days (up to 3 hours per day) and is aimed toward mechanical engineers and engineering managers looking to learn or refresh their knowledge (including for evaluation purposes) on how to use the AxSTREAM® software for the design, analysis, redesign and optimization of axial turbines. Contents can be adapted to focus on steam, gas, hydraulic or other types of turbines. Read more
- Week One: April 27 and 30
- Week Two: May 4 and 7
Virtual Turbomachinery & Pump Symposia
Axial Turbine Design Online Workshop
Rotor Dynamics Analysis Online Workshop
Session 1:
- Dates: November 18th – 20th
- Time: 11:00 AM-1:00PM EST
Session 2:
- Dates: November 23rd – 25th
- Time: 9:00AM-11:00AM CET
Performance Testing During the Turbomachinery Development Process Online Seminar
This online seminar will be the first in a series covering turbomachinery testing specific to the design process. The seminar will focus on testing requirements for turbomachinery components during the development process under laboratory conditions. Read more
We’re sorry, this seminar has already taken place! An on- demand version will be available on SoftInWay Turbomachinery University shortly
Understanding and Applying API Standards to Rotor Dynamics in Turbomachinery
In this web seminar we will teach external vendors, consultants, OEM’s, and maintenance personnel how to interpret reports and charts as it pertains to vibrations and reliability of the rotor-bearing system as well as how to perform rotor dynamics analyses and understand the results. Read more
Date: Tuesday, June 9th
Time: 3:00 PM – 5:00 PM Arabia Standard Time (AST)
Cost: $100 USD
2021 Winter EPRI Steam Turbine Generator Workshop
January 19th – 21th | Online
Technical Presentation: Case Studies of SoftInWay’s Extended Simulation Capabilities with STAR-CCM+ for Turbine
Applications
Date/Time: January 20th, 11:30AM EST
Speaker: Boris Kubrak
36th Space Symposium
Dates: August 22-26, 2021
Broadmoor| Colorado Springs, CO, USA
Tech Track Presentation:
- Title: Development of Liquid Rocket Engines for In-Space Propulsion using AxSTREAM.AI
- Presenter: Dr. Leonid Moroz
- Location: Broadmoor West: Rocky Mountain Ballroom A, 4:00PM
Liquid Propulsion Systems Seminar: From Payload and Orbit to Design of Rocket Engine Components
Date: Wednesday, May 8th, 2019
Time: 10:00 – 4:00 PM
Cost: Free event
Location: Huntsville, Alabama
During this 1-day seminar, attendees will be introduced to best practices, challenges, considerations, and requirements involved in liquid propulsion system development, illustrated through various case studies diving into component level development highlighting the turbopump and rocket nozzle as examples. Read More
* Please note: lunch and morning/afternoon refreshments are included in this event.
Turbo Expo 2019
June 17-21 | Phoenix, AZ
Join us for a week of workshops and presentations at Turbo Expo in Phoenix, AZ!
Booth #526
Accelerating Turbomachinery Design by Integrating In-house and Commercial Simulation Tools Seminar[
Dates: July 24th
Venue: The Centurion Hotel | Opp. Akashwani, Shivajinagar, Pune, Maharashtra 411005, India
In this 1-day seminar, we will discuss best practices for integrating different simulation software tools and automating the design process from thermodynamic cycles, aero-thermal design, CAD, CAE, rotordynamics, secondary systems, sealing systems, lubrication systems and much more. Read More
AIAA Energy and Propulsion Forum
August 19 – 22 | Indianapolis, IN, USA
Booth #401
Paper Presentation: Bypass Fan System of Turbofan Engines Optimization | Monday, August 19th | 2:30pm – 3:00pm
Paper Presentation: Application of Digital Twin for Gas Turbine Off-Design Performance and Operation Analyses | Monday, August 19th | 3:00pm 3:30pm
5th International Seminar on ORC Power Systems
48th Turbomachinery & 35th Pump Symposia
70th International Astronautical Congress
ASME 2019 Gas Turbine India Conference
December 5 – 6 | Chennai, India
Stop by the SoftInWay booth or attend our paper presentation!
Friday December 6th at 9:30 AM | An Integral Approach to Designing of an Optimized and Reliable Anti-icing System under Off-Design Operating Regimes in a Gas Turbine | Presented by Mr. Abdul Nassar
66 JANNAF Propulsion Meeting
December 9 - 13 | FL, USA
Presentation |Technical Walkthrough of LRE Design Using AxSTREAM.SPACE | Dr. Leonid Moroz, CEO
Modeling and Analysis of Multiphase Flow Systems Webinar
In this webinar, we will discuss several cases of modeling and analysis schemes with phase transition and mixing flow using our thermal-fluid network approach. Applications covered include rocket propulsion technology, heating cycles, and turbomachinery systems.
April 11th, 2019 | Start Time 10:00 – 11:00 AM EST
1 Day Seminar – Turbomachinery Made Easy in California
Date: March 28, 2019
Time: 10:00AM-4:00PM
Cost: Free
Location: DMG Mori | 5740 Warland Drive, Cypress, CA 90630, USA
EUEC 2019 Conference
February 25th – 27th | San Diego, CA, USA
SoftInWay will be hosting a 1 day workshop on Fundamental and Practical Aspects of Waste Heat Recovery. The workshop will take place on February 27th, from 7:30AM-4:00PM. We will also be exhibiting at booth #360 so don’t forget to stop by for a chat!
Paris Space Week
3-Day Workshop on Thermodynamic Cycle Simulation and Detailed Turbomachinery Design
Dates: March 6 – 8
Venue: Sardar Vallabhbhai Patel Institute of Technology | SVIT Vasad, Gujarat, India
This 3-day workshop provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery components and systems using the AxSTREAM® software platform as well as design, analysis and optimization of thermodynamic cycles using AxCYCLE™. Read More
35th Space Symposium
April 8 – 11 | Colorado Springs, CO, USA
Stage Presentation | Development of Highly Competitive Liquid Rocket Engines in Time of Space Gold Rush | Monday, April 8th at 4:40pm – 5:00pm | Dr. Leonid Moroz, CEO
1 Day Seminar – Turbomachinery Made Easy in India
Date: April 11, 2019
Time: 10:00AM-4:00PM
Cost: Free
Location: Hotel Sterlings MAC | #134, HAL Airport Rd, Kodihalli, Bengaluru – 560017, India