Events

基于全自动化流程的超临界二氧化碳透平叶片三维CFD优化

Rapid Reverse Engineering and Digital Twin Development with AxSTREAM

AxSTREAM 和 GT-POWER增压器及发动机系统集成设计联合在线讲座

Pump Webinar Chinese

CC Optimization

SCO

Coupled Aero, Thermal, & Structural Simulation of Cooled Turbine Blades

This joint webinar explores the integration of SoftInWay’s 0D-1D system-level modeling software with Ansys’ 3D CFD and thermal solvers for optimizing cooled turbine blades. Participants will gain insights into balancing aerodynamic efficiency and structural integrity while managing computational challenges, leading to significant time savings (40% or more) in simulations.

Read More

Date: Thursday, April 4th, 2024
Time: Start Time 10:00AM – 11:00AM EDT

Register

Seminar: Holistic Modeling of Energy Conversion & Thermal Management Systems

This 6-hour seminar focuses on the motivations and execution of holistic modeling for engineers and managers involved in energy conversion (power generation, propulsion, refrigeration, etc.) and thermal management (including fuel cell temperature regulation, generator/motor and electronic cooling, and heat exchangers) systems. Read More

Date: May 8
Time: Start Time 10:00AM – 4:00PM ET

Register

Past Events

Centrifugal Compressor and Fan Design

PumpThis course will lay the groundwork required for all engineers who are involved in design, optimization and operation of pumps. It runs for 5 days, 8 hours per day and is available in different locations worldwide. The course will consist of both fundamentals and hands-on practice where students will actually design, analyze and optimize axial and centrifugal pumps from scratch using the industry-leading AxSTREAM® platform.  Read More

Dates: March 11 - 15
Location: Boston, MA

Register

Hai Heli – Expo 2024

HAI HELI-EXPO

Dates: February 26th – 29th
Location: Anaheim, CA

Arrange a Meeting

Liquid Propulsion Systems: From Payload and Orbit to Design of Rocket Engine Components

Rocket EngineDate: Wednesday, May 8th, 2019
Time: 10:00 – 4:00 PM
Cost: Free event
Location: Huntsville, Alabama

During this 1-day seminar, attendees will be introduced to best practices, challenges, considerations, and requirements involved in liquid propulsion system development, illustrated through various case studies diving into component level development highlighting the turbopump and rocket nozzle as examples. Read More

* Please note: lunch and morning/afternoon refreshments are included in this event.

Register

66 JANNAF Propulsion Meeting

JANNAF_LogoDecember 9 - 13 | FL, USA

Presentation |Technical Walkthrough of LRE Design Using AxSTREAM.SPACE | Dr. Leonid Moroz, CEO

Arrange a Meeting

AHR Expo 2018

January 22-24 | Chicago, IL

Information

Space Propulsion 2018 – Spain

May 14 - 18 | Seville, Spain

Information

1 Day Seminar – Turbomachinery Made Easy in the UK

Date: June 26, 2018

Time: 10:00AM-5:00PM

Cost: Free

Location: Warwickshire , United Kingdom , Seco Tools UK, Adams Way, Springfield Business Park, Alcester, Warwickshire B49 6PU

With increasing pressure on all turbomachinery to be highly optimized, manufactured to greater tolerances and designed faster than ever, the need to have a seamless workflow from design to manufacture has become a major requirement throughout industries such as aerospace, automotive, and power generation. With that in mind, we're thrilled to announce an upcoming seminar which brings together two leaders in turbomachinery design and manufacturing applications to offer an end to end solution from concept to finished product.

SoftInWay’s AxSTREAM® CAE software and OPEN MIND’s CAM software hyperMILL® provides companies worldwide with the tools to achieve an integrated and efficient workflow from preliminary design to optimized cutting strategies for rapid manufacturing. The AxSTREAM®software suite provides users with an integrated and streamlined approach to turbomachinery design, redesign, analysis, and optimization, through a user-friendly and reliably platform. hyperMILL® offers the engineer the ability to machine complex turbomachinery parts easily with cutting strategies that will save time and be collision free. This seminar will present a seamless workflow from the initial concept and  3D design to a manufactured product.

Follow the link to learn more and register.

Register

1 Day Seminar – Turbomachinery Made Easy

Date: June 28, 2018

Time: 10:00AM-4:00PM

Cost: Free

Location: Stuttgart , Germany , Wöllhaf Konferenz- und Bankettcenter Stuttgart Airport | Terminal 1, Ebene 4

With increasing pressure on all turbomachinery to be highly optimized, manufactured to greater tolerances and designed faster than ever, the need to have a seamless workflow from design to manufacture has become a major requirement throughout industries such as aerospace, automotive, and power generation. With that in mind, we're thrilled to announce an upcoming seminar which brings together two leaders in turbomachinery design and manufacturing applications to offer an end to end solution from concept to finished product.

SoftInWay’s AxSTREAM® CAE software and OPEN MIND’s CAM software hyperMILL® provides companies worldwide with the tools to achieve an integrated and efficient workflow from preliminary design to optimized cutting strategies for rapid manufacturing. The AxSTREAM®software suite provides users with an integrated and streamlined approach to turbomachinery design, redesign, analysis, and optimization, through a user-friendly and reliably platform. hyperMILL® offers the engineer the ability to machine complex turbomachinery parts easily with cutting strategies that will save time and be collision free. This seminar will present a seamless workflow from the initial concept and  3D design to a manufactured product.

Follow the link to learn more and register.

Register

Thermal-Stress Monitoring and Lifetime Analysis of a Steam Turbine

In this webinar, online monitoring of turbine thermal-stresses and lifetime expenditure technology will be considered. A brief history and the current situation in the field of stress analyzer technology will be given and a special focus will be paid to the technical aspects of the methodology for online stress prediction of critical steam turbine components.Read More

September 7th, 2017 | Start Time 10:00 – 11:00 AM EDT

View Recording

AxSTREAM 3-Day Workshop for Professional Designers

This training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery using the AxSTREAM® software platform. During this interactive, hands-on workshop, engineers will use the AxSTREAM® software to successfully perform preliminary design of turbine flow paths, inverse and direct 1D/2D analysis and optimization (taking into account leakage balance and blade cooling), 3D profiling/stacking of the airfoils, 3D FEA and CFD, export of results to 3D CAD programs and more.

June 14 – 16, 2017 | Shanghai, China

Information

Design and Optimization of Axial and Mixed Flow Fans for High Efficiency and Low Noise

This one-hour webinar will begin with a brief introduction to the various applications of fans and continues onto the design and optimization process for these machines. The webinar will demonstrate AxSTREAM® for the development of competitive, high efficiency, and low noise axial and mixed flow fans for different aerodynamic loadings. Read More
May 18th , 2017 | Start Time 10:00 – 11:00 AM EDT

View Recording

46th Engine Systems Symposium

46th Engine Systems Symposium

April 6 – 7, 2017 | Cranfield University, Bedfordshire, UK

Information

Modern Design Process for Radial and Axial Turbomachinery

Modern Design Process for Radial and Axial Turbomachinery

March 8 – 10, 2017 | Erlangen, Germany

Information

Radial-Outflow Turbine for Usage in Organic Rankine Cycles

This 1 hour webinar will describe and demonstrate the radial-outflow turbine design and analysis in our fully integrated software platform AxSTREAM®. The results of our study on the reasonability of using radial-outflow turbines in ORC will be highlighted with special focus paid to the comparison of the different turbine types (radial-inflow, axial and radial-outflow) for its application in the real 3 MW WHR ORC power unit for an internal combustion engine.Read More

April 13, 2017  | Start Time 10:00 – 11:00 AM EDT

View Recording

Radial-Outflow Turbine for Usage in Organic Rankine Cycles

打造符合美国石油协会标准的离心压缩机——从概念到制造

SoftInWay很高兴宣布我们与Open Mind Technologies合作发布的在线研讨会即将举行,主题是“打造符合美国石油协会(API)标准的离心压缩机——从概念到制造”。研讨会将会在北京时间2017年3月9日上午9点准时举行,时长一小时,内容涵盖如何从根据设计要求进行流道设计到三维叶轮设计/分析以满足API标准,以及用hyperMILL软件进行数控加工编程

March 9, 2017

观看历史视频

打造符合美国石油协会标准的离心压缩机—从概念到制造

Turbomachinery Rotor Development, Dynamics Analysis and Testing

空冷式燃气轮机设计与分析中文研讨会

空冷式燃气轮机的设计及分析

本次在线研讨会时长预计一小时,将向大家描述和展示包括AxSTREAM®, AxSTREAM NET™ 和AxCYCLE™等模块的空气冷却燃气轮机的设计和分析系统(图1)。我们会向研讨会参与者简单介绍如何使用这些工具在较短的时间内开发空冷式燃气轮机。

北京时间2017年2月16日,星期四, 上午9点~10点

视频录像即将上线

Integrated Process for Turbomachinery Rotor Development, Dynamics Analysis and Testing

This webinar will be hosted by SoftInWay Inc. in collaboration with Test Devices Inc. The whole rotor-bearing system design, dynamics analysis and testing process will be considered with special attention paid to validation against test data for turbomachinery

March 2nd, 2017  | Start Time 10:00 – 11:00 AM EDT

View Recording

Space Tech Expo

Space Tech Expo

May 23 – 25, 2017 | Pasadena, California, USA

Information

Air-Cooled Gas Turbine Design and Analysis Webinar

This webinar will describe and demonstrate the cooled gas-turbine design and analysis system, developed by SoftInWay, via the utilization of AxSTREAM®, AxSTREAM NET™ and AxCYCLE™. The software presentation walks attendees through the main steps of how to use these tools to develop a highly efficient cooled gas turbine unit in a relatively short time frame.

Jan 19th, 2017  | Start Time 10:00 – 11:00 AM EDT

Watch

2017 AHR Expo

Jan 30 - Feb 1 | Las Vegas, Nevada, USAahr-expo-2017

Information

Power-Gen International Conference and Workshop

Booth #2313

Conference: December 13 – 15, 2016 | Orlando, Florida2016TPS
Orange County Convention Center

Gas Turbines Fundamentals Workshop: December 11, 2016  | Orlando, Florida
Orange County Convention Center

Information

Webinar – Rotor Bearing System Design and Dynamics Analysis

An integrated approach to rotor-bearing systems design and dynamics analysis will be considered. A special focus is paid to the rotor dynamics prediction for different machines and types of bearings. The advantages of AxSTREAM software platform for rotor dynamics and bearings simulation will be discussed.

Dec 8th, 2016  | Start Time 10:00 – 11:00 AM EDT

Watch

Webinar – Vapor Compression Refrigeration System Design

Multidisciplinary Vapor Compression Refrigeration System Design: From Thermodynamic Cycle and Hydraulic Circuit, Through Detailed Component Design, FEA, CFD & Rotor Dynamics

Oct 27th, 2016  | Start Time 10:00 – 11:00 AM EDT

Watch

Webinar – Rocket Engine Turbopump

Rocket Engine Turbopump: From Preliminary Blade Design to CFD & Rotor Dynamics in AxSTREAM® platform.

Watch

VDI-Tagung Stationäre Gasturbinen

November 16th-17th in Nuremberg, Germany

Information and registration 

The Pump Summit Dusseldorf

Pump Summit Logo
November 29th-30th in Dusseldorf, Germany

Information and registration 

1st European Seminar on Supercritical CO2 (sCO2) Power Systems

September 29th – 30th, 2016  in Vienna

Seminar information and registration 
sCO2 Turbines Fundamentals Workshop information and registration

45th Turbomachinery & 32nd Pump Symposia

Booth No #2836

September 12 – 15, 2016 | Houston, Texas2016TPS
George R. Brown Convention Center

Free Pass

Webinar – WHR System Design & Optimization

Free Webinar
Waste Heat Recovery System Design and Optimization, Full course preview

Watch

12th International Conference on Turbochargers and Turbocharging

IMECH17–18 May 2016
The Kia Oval,
Surrey County Cricket Club,
London
Visit Booth #17 !

AxSTREAM Net – New Thermal-fluid Simulation Software Secondary Flows

Free Webinar

Thursday May 26th, 2016
10:00 - 11:00 AM EST (EDT)

Watch

SAE 2016 World Congress and Exhibition

SAEApril 12-14, 2016
Detroit, Michigan, USA
Cobo Center

Rotor Dynamics Training Preview

Free Engineering Webinar

Watch

ASME Turbo Expo 2016

Seoul, South Korea
June 13 – 17, 2016
Visit Booth #1400!

Supercritical CO2 Power Cycles Symposium in San Antonio

March 29, 2016 – March 31, 2016

Hilton Palacio Del Rio
200 South Alamo Street
San Antonio, Texas

Asset Assessment & Improvement Strategies for Owners, Operators & End-Users of Gas Turbines

Free Engineering Webinar
Thursday, March 3rd, 2016
10:00 AM – 11:00 AM EST (EDT)

Watch