Events
基于全自动化流程的超临界二氧化碳透平叶片三维CFD优化
使用AxSTREAM进行叶轮机械快速逆向工程和数字孪生创建
AxSTREAM 和 GT-POWER增压器及发动机系统集成设计联合在线讲座
在离心泵设计中降低NPSHr的最佳实践
水冷式中央空调冷水机组离心压缩机的优化
超临界二氧化碳发电厂及组件的变工况模拟
Chinese Webinar: 惠而不费：AxSTREAM转子动力学及轴承分析
惠而不费：AxSTREAM转子动力学及轴承分析 | 2019年9月11日 北京时间晚上9:00-9:45
主要内容：
- AxSTREAM转子轴承模拟工具功能及特性概览及其在AxSTREAM平台的位置
- 现场演示AxSTREAM Rotor Dynamics模块和AxSTREAM Bearing模块
- 结合AxSTREAM ION将轴承优化过程自动化案例展示
面向人群：
- 有兴趣从事设备转子动力学及轴承计算优化的旋转机械设备工程师及设计师
- 有兴趣通过轴承优化提高设备寿命及性能的工程师
- 有兴趣在未来从事叶轮机械设计优化的工程系学生
Posts not found
Posts not found
Seminar: Holistic Modeling of Energy Conversion & Thermal Management Systems
This 6-hour seminar focuses on the motivations and execution of holistic modeling for engineers and managers involved in energy conversion (power generation, propulsion, refrigeration, etc.) and thermal management (including fuel cell temperature regulation, generator/motor and electronic cooling, and heat exchangers) systems. Read More
Date: May 8
Time: Start Time 10:00AM – 4:00PM ET
Centrifugal Compressor and Fan Design
This course will lay the groundwork required for all engineers who are involved in design, optimization and operation of pumps. It runs for 5 days, 8 hours per day and is available in different locations worldwide. The course will consist of both fundamentals and hands-on practice where students will actually design, analyze and optimize axial and centrifugal pumps from scratch using the industry-leading AxSTREAM® platform. Read More
Dates: March 11 - 15
Location: Boston, MA
Hai Heli – Expo 2024
Liquid Propulsion Systems: From Payload and Orbit to Design of Rocket Engine Components
Date: Wednesday, May 8th, 2019
Time: 10:00 – 4:00 PM
Cost: Free event
Location: Huntsville, Alabama
During this 1-day seminar, attendees will be introduced to best practices, challenges, considerations, and requirements involved in liquid propulsion system development, illustrated through various case studies diving into component level development highlighting the turbopump and rocket nozzle as examples. Read More
* Please note: lunch and morning/afternoon refreshments are included in this event.
66 JANNAF Propulsion Meeting
December 9 - 13 | FL, USA
Presentation |Technical Walkthrough of LRE Design Using AxSTREAM.SPACE | Dr. Leonid Moroz, CEO
Turbo Expo 2018
Radial Inflow Versus Outflow Turbines – Comparison, Advantages & Applicability
This 1 hour webinar will describe the basics of turbine operation as well as explore the advantages and disadvantages of each turbine type. Special attention will be paid to the areas of radial turbine applicability and features of their design will be explored in SoftInWay’s integrated software platform, AxSTREAM®. We will conclude with a demonstration of several innovative conceptual ideas in the area of radial turbomachinery. Read More
April 26th, 2018 | Start Time 10:00 – 11:00 AM Beijing Time
AHR Expo 2018
January 22-24 | Chicago, IL
Space Propulsion 2018 – Spain
May 14 - 18 | Seville, Spain
1 Day Seminar – Turbomachinery Made Easy
Date: June 26, 2018
Time: 10:00AM-5:00PM
Cost: Free
Location: Warwickshire , United Kingdom , Seco Tools UK, Adams Way, Springfield Business Park, Alcester, Warwickshire B49 6PU
With increasing pressure on all turbomachinery to be highly optimized, manufactured to greater tolerances and designed faster than ever, the need to have a seamless workflow from design to manufacture has become a major requirement throughout industries such as aerospace, automotive, and power generation. With that in mind, we're thrilled to announce an upcoming seminar which brings together two leaders in turbomachinery design and manufacturing applications to offer an end to end solution from concept to finished product.
SoftInWay’s AxSTREAM® CAE software and OPEN MIND’s CAM software hyperMILL® provides companies worldwide with the tools to achieve an integrated and efficient workflow from preliminary design to optimized cutting strategies for rapid manufacturing. The AxSTREAM®software suite provides users with an integrated and streamlined approach to turbomachinery design, redesign, analysis, and optimization, through a user-friendly and reliably platform. hyperMILL® offers the engineer the ability to machine complex turbomachinery parts easily with cutting strategies that will save time and be collision free. This seminar will present a seamless workflow from the initial concept and 3D design to a manufactured product.
Follow the link to learn more and register.
1 Day Seminar – Turbomachinery Made Easy
Date: June 28, 2018
Time: 10:00AM-4:00PM
Cost: Free
Location: Stuttgart , Germany , Wöllhaf Konferenz- und Bankettcenter Stuttgart Airport | Terminal 1, Ebene 4
With increasing pressure on all turbomachinery to be highly optimized, manufactured to greater tolerances and designed faster than ever, the need to have a seamless workflow from design to manufacture has become a major requirement throughout industries such as aerospace, automotive, and power generation. With that in mind, we're thrilled to announce an upcoming seminar which brings together two leaders in turbomachinery design and manufacturing applications to offer an end to end solution from concept to finished product.
SoftInWay’s AxSTREAM® CAE software and OPEN MIND’s CAM software hyperMILL® provides companies worldwide with the tools to achieve an integrated and efficient workflow from preliminary design to optimized cutting strategies for rapid manufacturing. The AxSTREAM®software suite provides users with an integrated and streamlined approach to turbomachinery design, redesign, analysis, and optimization, through a user-friendly and reliably platform. hyperMILL® offers the engineer the ability to machine complex turbomachinery parts easily with cutting strategies that will save time and be collision free. This seminar will present a seamless workflow from the initial concept and 3D design to a manufactured product.
Follow the link to learn more and register.
Power Gen International Conference
Las Vegas, Nevada, USA
December 08 – 10, 2015
Visit Booth #1014!
Thermal-Stress Monitoring and Lifetime Analysis of a Steam Turbine
AxSTREAM 3-Day Workshop for Professional Designers
This training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery using the AxSTREAM® software platform. During this interactive, hands-on workshop, engineers will use the AxSTREAM® software to successfully perform preliminary design of turbine flow paths, inverse and direct 1D/2D analysis and optimization (taking into account leakage balance and blade cooling), 3D profiling/stacking of the airfoils, 3D FEA and CFD, export of results to 3D CAD programs and more.
June 14 – 16, 2017 | Shanghai, China
Design and Optimization of Axial and Mixed Flow Fans for High Efficiency and Low Noise
AxSTREAM NET 热流体系统的模拟及燃气轮机二次流和冷却系统的分析设计
本次在线研讨会专为设计分析热流体系统的工程师定制，描述模拟热流体系统的方法，包含且不限于：燃气轮机二次流系统，燃气轮机叶片冷却系统，蒸汽轮机二次流系统，工业气体系统和通风系统等。
2017年5月4日 北京时间早上九点
Turbomachinery and System Design Workshop at Turbo Expo
Turbo Expo
Time: 8:00 AM – 5:00 PM
Cost: Free
Automated Design of an Industrial Steam Turbine
This one hour webinar will focus on best practices for optimizing the design process of an industrial axial steam turbine. Special emphasis will be placed on utilizing automation capabilities and ease of use for even entry level engineers. Attendees will receive an overview of how AxSTREAM, powered by AxSTREAM ION, can quickly and efficiently automate the different components required to complete the flow path design of a 30MW turbine. Other examples may be included.Read More
June 8th , 2017 | Start Time 10:00 – 11:00 AM EDT
46th Engine Systems Symposium
46th Engine Systems Symposium
April 6 – 7, 2017 | Cranfield University, Bedfordshire, UK
Modern Design Process for Radial and Axial Turbomachinery
Modern Design Process for Radial and Axial Turbomachinery
March 8 – 10, 2017 | Erlangen, Germany
Radial-Outflow Turbine for Usage in Organic Rankine Cycles
This 1 hour webinar will describe and demonstrate the radial-outflow turbine design and analysis in our fully integrated software platform AxSTREAM®. The results of our study on the reasonability of using radial-outflow turbines in ORC will be highlighted with special focus paid to the comparison of the different turbine types (radial-inflow, axial and radial-outflow) for its application in the real 3 MW WHR ORC power unit for an internal combustion engine.Read More
April 13, 2017 | Start Time 10:00 – 11:00 AM EDT
Radial-Outflow Turbine for Usage in Organic Rankine Cycles
打造符合美国石油协会标准的离心压缩机——从概念到制造
SoftInWay很高兴宣布我们与Open Mind Technologies合作发布的在线研讨会即将举行，主题是“打造符合美国石油协会（API）标准的离心压缩机——从概念到制造”。研讨会将会在北京时间2017年3月9日上午9点准时举行，时长一小时，内容涵盖如何从根据设计要求进行流道设计到三维叶轮设计/分析以满足API标准，以及用hyperMILL软件进行数控加工编程
March 9, 2017
打造符合美国石油协会标准的离心压缩机—从概念到制造
Turbomachinery Rotor Development, Dynamics Analysis and Testing
空冷式燃气轮机设计与分析中文研讨会
空冷式燃气轮机的设计及分析
本次在线研讨会时长预计一小时，将向大家描述和展示包括AxSTREAM®, AxSTREAM NET™ 和AxCYCLE™等模块的空气冷却燃气轮机的设计和分析系统（图1）。我们会向研讨会参与者简单介绍如何使用这些工具在较短的时间内开发空冷式燃气轮机。
北京时间2017年2月16日，星期四， 上午9点~10点
Integrated Process for Turbomachinery Rotor Development, Dynamics Analysis and Testing
This webinar will be hosted by SoftInWay Inc. in collaboration with Test Devices Inc. The whole rotor-bearing system design, dynamics analysis and testing process will be considered with special attention paid to validation against test data for turbomachinery
March 2nd, 2017 | Start Time 10:00 – 11:00 AM EDT
Space Tech Expo
Space Tech Expo
May 23 – 25, 2017 | Pasadena, California, USA
Air-Cooled Gas Turbine Design and Analysis Webinar
This webinar will describe and demonstrate the cooled gas-turbine design and analysis system, developed by SoftInWay, via the utilization of AxSTREAM®, AxSTREAM NET™ and AxCYCLE™. The software presentation walks attendees through the main steps of how to use these tools to develop a highly efficient cooled gas turbine unit in a relatively short time frame.
Jan 19th, 2017 | Start Time 10:00 – 11:00 AM EDT
2017 AHR Expo
Jan 30 - Feb 1 | Las Vegas, Nevada, USA
Power-Gen International Conference and Workshop
Booth #2313
Conference: December 13 – 15, 2016 | Orlando, Florida
Orange County Convention Center
Gas Turbines Fundamentals Workshop: December 11, 2016 | Orlando, Florida
Orange County Convention Center
Webinar – Rotor Bearing System Design and Dynamics Analysis
Webinar – Vapor Compression Refrigeration System Design
Webinar – Rocket Engine Turbopump
VDI-Tagung Stationäre Gasturbinen
November 16th-17th in Nuremberg, Germany
Information and registration
The Pump Summit Dusseldorf
November 29th-30th in Dusseldorf, Germany
Information and registration
1st European Seminar on Supercritical CO2 (sCO2) Power Systems
September 29th – 30th, 2016 in Vienna
Seminar information and registration
sCO2 Turbines Fundamentals Workshop information and registration
