Articles and Technical Papers
Full Steam Ahead: A Look at Steam Turbines and how the Speed of Development is Accelerating
Turbomachinery International| November/December 2016 Vo Read More…
Heavy Duty Gas Turbine Upgrade for Aerodynamic Performance Improvement
VDI-Fachtagung Stationäre Gasturbinen 2016, Nuremberg Read More…
Design and Analysis of a High Pressure Ratio Mixed Flow Compressor Stage
American Institute of Aeronautics and Astronautics
Steam Turbine Rotor Transient Thermo Structural Analysis and Lifetime Prediction
ASME 2016 Turbo Expo, Seoul | June 13-17 2016
Evaluation of Gas Turbine Exhaust Heat Recovery Utilizing SCO2 Cycle
International Gas Turbine Congress 2015, Tokyo | Novemb Read More…
Design Optimization of an Axial Flow Compressor for Industrial Gas Turbine
IJRET: International Journal of Research in Engineering Read More…
Design of Waste Heat Recovery Systems Based on Supercritical ORC for Powerful Gas and Diesel Engines
ASME ORC 2015 | October 12-14, 2015 | Brussels, Belgium
Evaluation for Scalability of a Combines Cycle using Gas and Bottoming SCO2 Turbines
Proceedings of ASME Power & Energy 2015 | June 28-J Read More…
Retrofit and Re-Design of a Four-Stage Centrifugal Compressor
SoftInWay consulting project with Sulzer Turbo Services Read More…
Designing Supercritical CO2 Power Plants Using An Integrated Design System
ASME Gas Turbine India Conference | December 15-17, 201 Read More…
A New Concept to Designing a Combined Cycle Cogeneration Power Plant – Article
Power Gen 2014 | Dec 9 -11 | Orlando, Florida USA
A New Concept to Designing a Combined Cycle Cogeneration Power Plant – Presentation
Power Gen 2014 Presentation Dr. Leonid Moroz – Pr Read More…
Study of a Supercritical CO2 Power Cycle Application in a Cogeneration Power Plant – Presentation
Supercritical CO2 Power Cycle Symposium | September 9-1 Read More…
Analysis and Optimization of Partial Admission Stages
ASIAN CONGRESS ON GAS TURBINES 2014 (ACGT2014), August Read More…
Turbomachinery Flowpath Design and Performance Analysis for Supercritical CO2
Proceedings of ASME Turbo Expo 2014: Turbine Technical Read More…
Redesign of a Steam Turbine with Unknown Boundary Conditions
TURBOMACHINERY INTERNATIONAL – The Global Journa Read More…
Axial Turbine Flow Path Design for an Organic Rankine Cycle Using R-245FA
Proceedings of ASME Turbo Expo 2013: Turbine Technical Conference and Exposition GT2013, San Antonio, Texas, USA, GT2013-94078
AxSTREAM Used In Preliminary Design of SABRE Compressor
Case study of Reaction Engines’ Design of SABRE C Read More…
Supercritical C02 Brayton Cycle
TURBOMACHINERY INTERNATIONAL, The Global Journal of Energy Equipment, January/February 2013, Volume 54, Number 1
Integrated Environment for Gas Turbine Preliminary Design
Osaka International Gas Turbine Congress 2011, Osaka, November 13-18, 2011, Japan
Designing Turbomachinery for Higher Efficiency: choosing the optimal design or saving engineering hours? Both!
SoftInWay Whitepaper
Thermodynamic Considerations for Large Steam Turbine Upgrades and Retrofits
POWER-GEN Asia 2011, Kuala-Lumpur, Malaysia, September 27-29, 2011
Software in the classroom. Demonstrating a stepwise approach to turbomachinery design
TURBOMACHINERY INTERNATIONAL, The Global Journal of Energy Equipment, January/February 2011
Experience in Teaching Turbomachinery Using Advanced Dedicated Software
ASME 2010 International Mechanical Engineering Congress & Exposition November 12-18, 2010, Vancouver, British Columbia, Canada
Comparison of Counter-rotating and Traditional Axial Aircraft Low-pressure Turbines Integral and Detailed Performances
Int. Symp. on Heat Transfer in Gas Turbine Systems 9-14 August 2009, Antalya, Turkey
Designing the Flowpath. Robust and Efficient Aerodynamics and Structural Solvers Can Provide an Integrated Software Solution for Performing the Entire Workflow
TURBOMACHINERY INTERNATIONAL, The Global Journal of Energy Equipment, March/April 2009, Vol.50 NO.2
Integrated Conceptual Design Environment for Centrifugal Compressors Flow Path Design
Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, November 2-6, 2008, Boston, Massachusetts, USA
Advanced Gas Turbine Concept, Design and Evaluation Methodology. Preliminary Design of Highly Loaded Low Pressure Gas Turbine of Engine
Proceedings of the International Gas Turbine Congress 2007 Tokyo December 3-7, 2007
Investigation of a Steam Turbine with leaned blades by Through Flow Analysis and 3D CFD Simulation
International Conference on Power Engineering-2007 October 23-27, 2007, Hangzhou, China
A uniform approach to conceptual design of axial turbine compressor flow path
The Future of Gas Turbine Technology 3rd International Conference 11-12 October 2006, Brussels, Belgium
Axial turbine stages design: 1D/2D/3D simulation, experiment, optimization – design of single stage test air turbine models and validation of 1D/2D/3D aerodynamic computation results against test data.
Proceedings of GT2005 ASME Turbo Expo 2005: Power for Land, Sea and Air June 6-9, 2005, Reno-Tahoe, Nevada, USA
Flow phenomenon in steam turbine disk-stator cavities channeled by balance holes
Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, and Air June 14-17, 2004, Vienna, Austria
Methods and tools for multidisciplinary optimization of axial turbine stages with relatively long blades
Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, and Air June 14-17, 2004, Vienna, Austria
Vibration Analysis of Low Pressure Stages of Large Steam Turbines with ANSYS
Proceedings of 2004 International ANSYS Conference May 24-26, Pittsburgh, PA, USA
Coupled CFD and thermal steady state analysis of steam turbine secondary flow path.
IJPGC 2003 2003 International Joint Power Generation Conference June 16-19, 2003, Atlanta, Georgia, USA