Events

基于全自动化流程的超临界二氧化碳透平叶片三维CFD优化

使用AxSTREAM进行叶轮机械快速逆向工程和数字孪生创建

AxSTREAM 和 GT-POWER增压器及发动机系统集成设计联合在线讲座

在离心泵设计中降低NPSHr的最佳实践

水冷式中央空调冷水机组离心压缩机的优化

超临界二氧化碳发电厂及组件的变工况模拟

Chinese Webinar: 惠而不费:AxSTREAM转子动力学及轴承分析

惠而不费:AxSTREAM转子动力学及轴承分析 | 2019年9月11日 北京时间晚上9:00-9:45

主要内容:

  • AxSTREAM转子轴承模拟工具功能及特性概览及其在AxSTREAM平台的位置
  • 现场演示AxSTREAM Rotor Dynamics模块和AxSTREAM Bearing模块
  • 结合AxSTREAM ION将轴承优化过程自动化案例展示

面向人群:

  • 有兴趣从事设备转子动力学及轴承计算优化的旋转机械设备工程师及设计师
  • 有兴趣通过轴承优化提高设备寿命及性能的工程师
  • 有兴趣在未来从事叶轮机械设计优化的工程系学生

注册

Coupled Aero, Thermal, & Structural Simulation of Cooled Turbine Blades

This joint webinar explores the integration of SoftInWay’s 0D-1D system-level modeling software with Ansys’ 3D CFD and thermal solvers for optimizing cooled turbine blades. Participants will gain insights into balancing aerodynamic efficiency and structural integrity while managing computational challenges, leading to significant time savings (40% or more) in simulations.

Read More

Date: Thursday, April 4th, 2024
Time: Start Time 10:00AM – 11:00AM EDT

Register

Seminar: Holistic Modeling of Energy Conversion & Thermal Management Systems

This 6-hour seminar focuses on the motivations and execution of holistic modeling for engineers and managers involved in energy conversion (power generation, propulsion, refrigeration, etc.) and thermal management (including fuel cell temperature regulation, generator/motor and electronic cooling, and heat exchangers) systems. Read More

Date: May 8
Time: Start Time 10:00AM – 4:00PM ET

Register

Past Events

Centrifugal Compressor and Fan Design

PumpThis course will lay the groundwork required for all engineers who are involved in design, optimization and operation of pumps. It runs for 5 days, 8 hours per day and is available in different locations worldwide. The course will consist of both fundamentals and hands-on practice where students will actually design, analyze and optimize axial and centrifugal pumps from scratch using the industry-leading AxSTREAM® platform.  Read More

Dates: March 11 - 15
Location: Boston, MA

Register

Hai Heli – Expo 2024

HAI HELI-EXPO

Dates: February 26th – 29th
Location: Anaheim, CA

Arrange a Meeting

Liquid Propulsion Systems: From Payload and Orbit to Design of Rocket Engine Components

Rocket EngineDate: Wednesday, May 8th, 2019
Time: 10:00 – 4:00 PM
Cost: Free event
Location: Huntsville, Alabama

During this 1-day seminar, attendees will be introduced to best practices, challenges, considerations, and requirements involved in liquid propulsion system development, illustrated through various case studies diving into component level development highlighting the turbopump and rocket nozzle as examples. Read More

* Please note: lunch and morning/afternoon refreshments are included in this event.

Register

66 JANNAF Propulsion Meeting

JANNAF_LogoDecember 9 - 13 | FL, USA

Presentation |Technical Walkthrough of LRE Design Using AxSTREAM.SPACE | Dr. Leonid Moroz, CEO

Arrange a Meeting

Turbo Expo 2018

 

 

Radial Inflow Versus Outflow Turbines – Comparison, Advantages & Applicability

This 1 hour webinar will describe the basics of turbine operation as well as explore the advantages and disadvantages of each turbine type. Special attention will be paid to the areas of radial turbine applicability and features of their design will be explored in SoftInWay’s integrated software platform, AxSTREAM®. We will conclude with a demonstration of several innovative conceptual ideas in the area of radial turbomachinery. Read More

April 26th, 2018 | Start Time 10:00 – 11:00 AM Beijing Time

Register

AHR Expo 2018

January 22-24 | Chicago, IL

Information

Space Propulsion 2018 – Spain

May 14 - 18 | Seville, Spain

Information

1 Day Seminar – Turbomachinery Made Easy

Date: June 26, 2018

Time: 10:00AM-5:00PM

Cost: Free

Location: Warwickshire , United Kingdom , Seco Tools UK, Adams Way, Springfield Business Park, Alcester, Warwickshire B49 6PU

With increasing pressure on all turbomachinery to be highly optimized, manufactured to greater tolerances and designed faster than ever, the need to have a seamless workflow from design to manufacture has become a major requirement throughout industries such as aerospace, automotive, and power generation. With that in mind, we're thrilled to announce an upcoming seminar which brings together two leaders in turbomachinery design and manufacturing applications to offer an end to end solution from concept to finished product.

SoftInWay’s AxSTREAM® CAE software and OPEN MIND’s CAM software hyperMILL® provides companies worldwide with the tools to achieve an integrated and efficient workflow from preliminary design to optimized cutting strategies for rapid manufacturing. The AxSTREAM®software suite provides users with an integrated and streamlined approach to turbomachinery design, redesign, analysis, and optimization, through a user-friendly and reliably platform. hyperMILL® offers the engineer the ability to machine complex turbomachinery parts easily with cutting strategies that will save time and be collision free. This seminar will present a seamless workflow from the initial concept and  3D design to a manufactured product.

Follow the link to learn more and register.

Register

1 Day Seminar – Turbomachinery Made Easy

Date: June 28, 2018

Time: 10:00AM-4:00PM

Cost: Free

Location: Stuttgart , Germany , Wöllhaf Konferenz- und Bankettcenter Stuttgart Airport | Terminal 1, Ebene 4

With increasing pressure on all turbomachinery to be highly optimized, manufactured to greater tolerances and designed faster than ever, the need to have a seamless workflow from design to manufacture has become a major requirement throughout industries such as aerospace, automotive, and power generation. With that in mind, we're thrilled to announce an upcoming seminar which brings together two leaders in turbomachinery design and manufacturing applications to offer an end to end solution from concept to finished product.

SoftInWay’s AxSTREAM® CAE software and OPEN MIND’s CAM software hyperMILL® provides companies worldwide with the tools to achieve an integrated and efficient workflow from preliminary design to optimized cutting strategies for rapid manufacturing. The AxSTREAM®software suite provides users with an integrated and streamlined approach to turbomachinery design, redesign, analysis, and optimization, through a user-friendly and reliably platform. hyperMILL® offers the engineer the ability to machine complex turbomachinery parts easily with cutting strategies that will save time and be collision free. This seminar will present a seamless workflow from the initial concept and  3D design to a manufactured product.

Follow the link to learn more and register.

Register

Power Gen International Conference

PGI-ColorLas Vegas, Nevada, USA
December 08 – 10, 2015
Visit Booth #1014!

Thermal-Stress Monitoring and Lifetime Analysis of a Steam Turbine

In this webinar, online monitoring of turbine thermal-stresses and lifetime expenditure technology will be considered. A brief history and the current situation in the field of stress analyzer technology will be given and a special focus will be paid to the technical aspects of the methodology for online stress prediction of critical steam turbine components.Read More

September 7th, 2017 | Start Time 10:00 – 11:00 AM EDT

View Recording

AxSTREAM 3-Day Workshop for Professional Designers

This training provides participants with a practical understanding of the design, analysis and optimization of flow paths for turbomachinery using the AxSTREAM® software platform. During this interactive, hands-on workshop, engineers will use the AxSTREAM® software to successfully perform preliminary design of turbine flow paths, inverse and direct 1D/2D analysis and optimization (taking into account leakage balance and blade cooling), 3D profiling/stacking of the airfoils, 3D FEA and CFD, export of results to 3D CAD programs and more.

June 14 – 16, 2017 | Shanghai, China

Information

Design and Optimization of Axial and Mixed Flow Fans for High Efficiency and Low Noise

This one-hour webinar will begin with a brief introduction to the various applications of fans and continues onto the design and optimization process for these machines. The webinar will demonstrate AxSTREAM® for the development of competitive, high efficiency, and low noise axial and mixed flow fans for different aerodynamic loadings. Read More
May 18th , 2017 | Start Time 10:00 – 11:00 AM EDT

View Recording

AxSTREAM NET 热流体系统的模拟及燃气轮机二次流和冷却系统的分析设计

本次在线研讨会专为设计分析热流体系统的工程师定制,描述模拟热流体系统的方法,包含且不限于:燃气轮机二次流系统,燃气轮机叶片冷却系统,蒸汽轮机二次流系统,工业气体系统和通风系统等。

2017年5月4日 北京时间早上九点

观看历史视频

Turbomachinery and System Design Workshop at Turbo Expo

Turbo Expo

June 25th, 2017 | Charlotte, NC, USA
Time: 8:00 AM – 5:00 PM
Cost: Free
Information

Automated Design of an Industrial Steam Turbine

This one hour webinar will focus on best practices for optimizing the design process of an industrial axial steam turbine. Special emphasis will be placed on utilizing automation capabilities and ease of use for even entry level engineers. Attendees will receive an overview of how AxSTREAM, powered by AxSTREAM ION, can quickly and efficiently automate the different components required to complete the flow path design of a 30MW turbine. Other examples may be included.Read More

June 8th , 2017 | Start Time 10:00 – 11:00 AM EDT

Register

46th Engine Systems Symposium

46th Engine Systems Symposium

April 6 – 7, 2017 | Cranfield University, Bedfordshire, UK

Information

Modern Design Process for Radial and Axial Turbomachinery

Modern Design Process for Radial and Axial Turbomachinery

March 8 – 10, 2017 | Erlangen, Germany

Information

Radial-Outflow Turbine for Usage in Organic Rankine Cycles

This 1 hour webinar will describe and demonstrate the radial-outflow turbine design and analysis in our fully integrated software platform AxSTREAM®. The results of our study on the reasonability of using radial-outflow turbines in ORC will be highlighted with special focus paid to the comparison of the different turbine types (radial-inflow, axial and radial-outflow) for its application in the real 3 MW WHR ORC power unit for an internal combustion engine.Read More

April 13, 2017  | Start Time 10:00 – 11:00 AM EDT

View Recording

Radial-Outflow Turbine for Usage in Organic Rankine Cycles

打造符合美国石油协会标准的离心压缩机——从概念到制造

SoftInWay很高兴宣布我们与Open Mind Technologies合作发布的在线研讨会即将举行,主题是“打造符合美国石油协会(API)标准的离心压缩机——从概念到制造”。研讨会将会在北京时间2017年3月9日上午9点准时举行,时长一小时,内容涵盖如何从根据设计要求进行流道设计到三维叶轮设计/分析以满足API标准,以及用hyperMILL软件进行数控加工编程

March 9, 2017

观看历史视频

打造符合美国石油协会标准的离心压缩机—从概念到制造

Turbomachinery Rotor Development, Dynamics Analysis and Testing

空冷式燃气轮机设计与分析中文研讨会

空冷式燃气轮机的设计及分析

本次在线研讨会时长预计一小时,将向大家描述和展示包括AxSTREAM®, AxSTREAM NET™ 和AxCYCLE™等模块的空气冷却燃气轮机的设计和分析系统(图1)。我们会向研讨会参与者简单介绍如何使用这些工具在较短的时间内开发空冷式燃气轮机。

北京时间2017年2月16日,星期四, 上午9点~10点

视频录像即将上线

Integrated Process for Turbomachinery Rotor Development, Dynamics Analysis and Testing

This webinar will be hosted by SoftInWay Inc. in collaboration with Test Devices Inc. The whole rotor-bearing system design, dynamics analysis and testing process will be considered with special attention paid to validation against test data for turbomachinery

March 2nd, 2017  | Start Time 10:00 – 11:00 AM EDT

View Recording

Space Tech Expo

Space Tech Expo

May 23 – 25, 2017 | Pasadena, California, USA

Information

Air-Cooled Gas Turbine Design and Analysis Webinar

This webinar will describe and demonstrate the cooled gas-turbine design and analysis system, developed by SoftInWay, via the utilization of AxSTREAM®, AxSTREAM NET™ and AxCYCLE™. The software presentation walks attendees through the main steps of how to use these tools to develop a highly efficient cooled gas turbine unit in a relatively short time frame.

Jan 19th, 2017  | Start Time 10:00 – 11:00 AM EDT

Watch

2017 AHR Expo

Jan 30 - Feb 1 | Las Vegas, Nevada, USAahr-expo-2017

Information

Power-Gen International Conference and Workshop

Booth #2313

Conference: December 13 – 15, 2016 | Orlando, Florida2016TPS
Orange County Convention Center

Gas Turbines Fundamentals Workshop: December 11, 2016  | Orlando, Florida
Orange County Convention Center

Information

Webinar – Rotor Bearing System Design and Dynamics Analysis

An integrated approach to rotor-bearing systems design and dynamics analysis will be considered. A special focus is paid to the rotor dynamics prediction for different machines and types of bearings. The advantages of AxSTREAM software platform for rotor dynamics and bearings simulation will be discussed.

Dec 8th, 2016  | Start Time 10:00 – 11:00 AM EDT

Watch

Webinar – Vapor Compression Refrigeration System Design

Multidisciplinary Vapor Compression Refrigeration System Design: From Thermodynamic Cycle and Hydraulic Circuit, Through Detailed Component Design, FEA, CFD & Rotor Dynamics

Oct 27th, 2016  | Start Time 10:00 – 11:00 AM EDT

Watch

Webinar – Rocket Engine Turbopump

Rocket Engine Turbopump: From Preliminary Blade Design to CFD & Rotor Dynamics in AxSTREAM® platform.

Watch

VDI-Tagung Stationäre Gasturbinen

November 16th-17th in Nuremberg, Germany

Information and registration 

The Pump Summit Dusseldorf

Pump Summit Logo
November 29th-30th in Dusseldorf, Germany

Information and registration 

1st European Seminar on Supercritical CO2 (sCO2) Power Systems

September 29th – 30th, 2016  in Vienna

Seminar information and registration 
sCO2 Turbines Fundamentals Workshop information and registration

45th Turbomachinery & 32nd Pump Symposia

Booth No #2836

September 12 – 15, 2016 | Houston, Texas2016TPS
George R. Brown Convention Center

Free Pass

Webinar – WHR System Design & Optimization

Free Webinar
Waste Heat Recovery System Design and Optimization, Full course preview

Watch

12th International Conference on Turbochargers and Turbocharging

IMECH17–18 May 2016
The Kia Oval,
Surrey County Cricket Club,
London
Visit Booth #17 !