Integrating In-House Simulation Tools with Commercial Products

Best Practices for Integrating and Automating Thermodynamic Cycles, Aerodynamic Design, Rotor Dynamics, Secondary System Modeling, CAD and more.
February 28th, 2019 | Start Time 10:00 – 11:00 AM EST

View Recording

Integration and automation are two widely acknowledged concepts in the development of modern technology. It comes as no surprise that companies can thrive on the reduction of manual intervention which can be achieved by integrating and standardizing the engineering workflow and automating the data transfer among various engineering processes. Using this approach, non-essential recurring tasks (and subsequent time and expenses) are significantly reduced and a lean engineering process can be achieved.

Integration Picture

When it comes to detailed turbomachinery design, a robust approach is even more critical, as the process is multi-faceted, and there are tight checks that must be followed for the design to be viable. With this in mind, it is inevitable for any OEM in this field to not only standardize and integrate all their processes, but also to focus on their core competency of developing equipment as opposed to coding. Use of specialized software developed and supported by a single vendor is a key here. SoftInWay provides this advantage with its fully integrated AxSTREAM® Suite, which encompasses the complete process for radial, axial and mixed flow turbomachinery design all in a seamless platform. Additionally, tools for secondary flow analysis, cycle design, rotor dynamics analysis etc. can also be easily combined in a single loop that runs from start to finish without much intervention.

In this webinar, we will discuss the importance and benefits of a modernized approach to the standard engineering process. We will explore several case studies and examples utilizing AxSTREAM® and AxSTREAM ION™ for turbomachinery design and process integration/automation to easily run what-if scenarios and adapt previously completed projects for future developments. Be it the off-design and off-load study of a power plant, or the secondary flow and cooling flow simulation in gas turbines, we will see how any complex engineering problem can be solved in a fraction of the time and cost when compared to traditional development methods.

The scope includes:
  • Introduction to common challenges present in the development of modern day technology
  • Benefits of automation and integration in the scope of turbomachinery component and system design
  • Introduction to AxSTREAM and AxSTREAM ION™ for facilitating lean methods in turbomachinery design and retrofitting.
  • Several case studies implementing process automation into turbomachinery simulation
Who should attend?
  • Engineers and Engineering Managers working in OEMs and interested in process integration and automation.
  • Researchers and scientists in the fields of engineering, computation and automation.
  • Technical managers and service providers looking to improve or expand their product range by incorporating innovative engineering solutions into their development process.
  • Engineering professionals, Professors, and Students interested in exploring the possibilities introduced through integration and automation.

View Recording

Webinar Schedule:
Webinar
Date
Time
Register
Turbocharger Design, Selection, and System Level Optimization Utilizing GT-SUITE and AxSTREAM® Read MoreMay 23, 201910:00 AM EDTRegister
Modeling and Analysis of Multiphase Flow Systems Read More
April 11, 201910:00 AM EDTView Recording
Integrating In-House Simulation Tools with Commercial Products Read More
February 28, 201910:00 AM ESTView Recording
Liquid Rocket Engine Turbopump Development Workshop Preview
Read More
January 17, 2019 10:00 AM ESTView Recording
非设计工况下蒸汽轮机流道和汽封的细节化模拟
点击了解更多
December 20, 201810:00 AM UTC +8观看历史视频
Detailed Simulation of a Steam Turbine Flow Path and End Seals During Off-Design Operations
Read More
November 29, 201810:00 AM ESTView Recording
余热利用系统及设备设计在线研讨会 点击了解更多November 8, 201810:00AM UTC+8观看历史视频
Soothing Range Anxiety – A Look into the Past, Present and Future of Range Extenders Read MoreOctober 18, 201810:00 AM EDTView Recording
Anti-Icing System Modeling and Simulation for Gas Turbines Read MoreSeptember 6, 201810:00 AM EDTView Recording
Advancements in Turbomachinery Development for Electric Propulsion Read MoreMay 24, 201810:00 AM EDTView Recording
向心透平与离心透平- 对比、优劣与应用 Read MoreApril 26, 201810:00 AM UTC+8观看历史视频
Thermal-Fluid Simulation for Steam and Gas Turbine Systems Read MoreApril 19, 201810:00 AM EDTView Recording
Radial Inflow Versus Outflow Turbines - Comparison, Advantages and Applicability Read MoreMarch 1, 201810:00 AM ESTView Recording
考虑转子动力学约束的液体动压轴承优化 Read MoreMarch 1, 201810:00AM UTC+8观看历史视频
宽工作范围内离心压缩机的优化 Read MoreFebruary 1, 201810:00AM UTC+8观看历史视频
Hydrodynamic Journal Bearing Optimization Considering Rotor Dynamic Restrictions Read MoreJanuary 18, 201810:00 AM ESTView Recording
AxSTREAM ION as a Tool for Cooled Gas Turbine Unit Performance Calculations and Improvements Read MoreNovember 16, 2017 10:00 AM ESTView Recording
Optimizing Centrifugal Compressors for a Wide Operating Range Read More October 19, 201710:00 AM ESTView Recording
Thermal-Stress Monitoring and Lifetime Analysis of a Steam Turbine Read MoreSeptember 7, 201710:00 AM ESTView Recording
Automated Design of an Industrial Steam Turbine Read MoreJune 8, 201710:00 AM ESTView Recording
Design and Optimization of Axial and Mixed Flow Fans Read MoreMay 18, 201710:00 AM ESTView Recording
AxSTREAM NET 热流体系统的模拟及燃气轮机二次流和冷却系统的分析设计 Read More
May 4, 20179:00AM UTC+8观看历史视频
Radial-Outflow Turbine for Usage in Organic Rankine Cycles Read MoreApril 13, 201710:00 AM ESTView Recording
打造符合美国石油协会标准的离心压缩机
Read More
March 9, 20179:00AM UTC+8观看历史视频
Turbomachinery Rotor Development, Dynamics Analysis and Testing
Read More
March 2, 201710:00 AM ESTView Recording
空冷式燃气轮机的设计及分析
Read More
February 16, 20179:00AM UTC+8观看历史视频
Air-Cooled Gas Turbine Design and Analysis
Read More
January 19, 201710:00 AM ESTView Recording
Rotor Bearing System Design and Dynamics Analysis
Read More

Dec 8, 201610:00 AM EDTView Recording
Vapor Compression Refrigeration System
Read More
Oct 27, 201610:00 AM EDTView Recording
Rocket Engine Turbopump: From Preliminary Blade Design to CFD & Rotor Dynamics in AxSTREAM® platform.

Read More

Sep 29, 201610:00 AM EDTView Recording
Waste Heat Recovery System Design and Optimization – Preview to Full Course
Read More
Aug 11, 201610:00 AM ESTView Recording
AxSTREAM Net - New Thermal-fluid Simulation Software Secondary FlowsMay 26, 201610:00 AM ESTView Recording
Rotor Dynamics Training PreviewApril 21, 201610:00 AM ESTView Recording
Asset Assessment & Improvement Strategies for Owners, Operators & End-Users of Gas TurbinesMarch 3, 201610:00 AM ESTView Recording
Cost Estimation and Economic Analysis for Power PlantsJanuary 21, 201610:00 AM EST (EDT)View Recording
Innovation Strategy: How to Leverage Turbomachinery Reverse EngineeringNovember 12, 201510:00 AM EST (EDT)View Recording
Design of Waste Heat Recovery Systems Based on Supercritical ORC for Powerful EnginesOctober 8, 201510:00 AM EST (EDT)View Recording
Rotor Dynamics and Journal Bearing Design & Analysis September 3, 201510:00 AM EST (EDT)View Recording
Aerospace Innovation: Faster, Higher, Further, Safer, Greener, and More EfficientApril 30, 201510:00 AM EST (EDT)View Recording
Boost of Larger ICEs Through Combinations of Turbochargers, Blowdown Turbines And Organic Rankine CyclesMarch 26, 201510:00 AM EST (EDT)View Recording
OEM & Service Provider Strategies for reducing cost & time of Turbomachinery Blade Design/Redesign by over 50%January 13, 201510:00 AM EST (EDT)View Recording
Maximizing Turbocharger Boost with Advanced Design FeaturesNovember 20, 201410:00 AM EST (EDT)View Recording
Mini and Micro Gas Turbines Crash CourseOctober, 9, 201410:00 AM EST (EDT)View Recording
Centrifugal Compressor Design: Can You Really Avoid Choke and Surge?
June 26, 201410:00 AM EST (EDT)View recording
An Advanced System to Design Supercritical CO2 Power PlantsMay 15, 201410:00 AM EST (EDT)View recording
Steam Turbine Series:
Webinar 3: Shortening Start Up and Life Prediction of Critical Components
March 27, 201410:00 AM ESTView recording
Steam Turbine Series:
Webinar 2: Is Feasible to Upgrade My Steam Turbine?
February 12, 201410:00 AM ESTView recording
Steam Turbine Series:
Webinar 1: Developing Reliable, High Perfomance Advanced 3D Blades
January 8, 201410:00 AM ESTView recording
Challenges and Solutions to Waste Heat Recovery for Internal Combustion EnginesDecember 5, 201310:00 AM ESTView recording