Articles and Technical Papers

Heavy Duty Gas Turbine Upgrade for Aerodynamic Performance Improvement

VDI-Fachtagung Stationäre Gasturbinen 2016,  Nuremberg | November 16th-17th, 2016

Design and Analysis of a High Pressure Ratio Mixed Flow Compressor Stage

American Institute of Aeronautics and Astronautics

Steam Turbine Rotor Transient Thermo Structural Analysis and Lifetime Prediction

ASME 2016 Turbo Expo, Seoul | June 13-17 2016  

Evaluation of Gas Turbine Exhaust Heat Recovery Utilizing SCO2 Cycle

International Gas Turbine Congress 2015, Tokyo | November 15-20, 2015

Design Optimization of and Axial Flow Compressor for Industrial Gas Turbine

IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 Volume: 03 Issue: 05 | May-2014

Design of Waste Heat Recovery Systems Based on Supercritical ORC for Powerful Gas and Diesel Engines

ASME ORC 2015 | October 12-14, 2015 | Brussels, Belgium

Evaluation for Scalability of a Combines Cycle using Gas and Bottoming SCO2 Turbines

Proceedings of ASME Power & Energy 2015 | June 28-July 2, 2015, San Diego Convention Center

Retrofit and Re-Design of a Four-Stage Centrifugal Compressor

SoftInWay consulting project with Sulzer Turbo Services Rotterdam B.V. 2015

Designing Supercritical CO2 Power Plants Using An Integrated Design System

ASME Gas Turbine India Conference | December 15-17, 2014, New Dehli, India.

A New Concept to Designing a Combined Cycle Cogeneration Power Plant – Article

Power Gen 2014 | Dec 9 -11 | Orlando, Florida USA

A New Concept to Designing a Combined Cycle Cogeneration Power Plant – Presentation

Power Gen 2014 Presentation Dr. Leonid Moroz – Presented by Dr. Boris Frolov, Dr. Maksym Burlaka | Dec 9 -11 | Orlando, Florida USA

Study of a Supercritical CO2 Power Cycle Application in a Cogeneration Power Plant – Presentation

Supercritical CO2 Power Cycle Symposium | September 9-10. 2012 | Pittsburgh, PA, USA

Analysis and Optimization of Partial Admission Stages

ASIAN CONGRESS ON GAS TURBINES 2014 (ACGT2014), August 18-20, 2014 Seoul, Korea

Turbomachinery Flowpath Design and Performance Analysis for Supercritical CO2

Proceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition GT2014 June 16 – 20, 2014, Düsseldorf, Germany

Redesign of a Steam Turbine with Unknown Boundary Conditions

TURBOMACHINERY INTERNATIONAL  – The Global Journal of Energy Equipment May/June 2014 – Volume 55 Number 3  

Axial Turbine Flow Path Design for an Organic Rankine Cycle Using R-245FA

Proceedings of ASME Turbo Expo 2013: Turbine Technical Conference and Exposition GT2013, San Antonio, Texas, USA, GT2013-94078

AxSTREAM Used In Preliminary Design of SABRE Compressor

Case study of Reaction Engines’ Design of SABRE Compressor and use with AxSTREAM.

Supercritical C02 Brayton Cycle

TURBOMACHINERY INTERNATIONAL, The Global Journal of Energy Equipment, January/February 2013, Volume 54, Number 1

Integrated Environment for Gas Turbine Preliminary Design

Osaka International Gas Turbine Congress 2011, Osaka, November 13-18, 2011, Japan

Designing Turbomachinery for Higher Efficiency: choosing the optimal design or saving engineering hours? Both!

SoftInWay Whitepaper

Thermodynamic Considerations for Large Steam Turbine Upgrades and Retrofits

POWER-GEN Asia 2011, Kuala-Lumpur, Malaysia, September 27-29, 2011

Software in the classroom. Demonstrating a stepwise approach to turbomachinery design

TURBOMACHINERY INTERNATIONAL, The Global Journal of Energy Equipment, January/February 2011

Experience in Teaching Turbomachinery Using Advanced Dedicated Software

ASME 2010 International Mechanical Engineering Congress & Exposition November 12-18, 2010, Vancouver, British Columbia, Canada

Comparison of Counter-rotating and Traditional Axial Aircraft Low-pressure Turbines Integral and Detailed Performances

Int. Symp. on Heat Transfer in Gas Turbine Systems 9-14 August 2009, Antalya, Turkey

Designing the Flowpath. Robust and Efficient Aerodynamics and Structural Solvers Can Provide an Integrated Software Solution for Performing the Entire Workflow

TURBOMACHINERY INTERNATIONAL, The Global Journal of Energy Equipment, March/April 2009, Vol.50 NO.2

Integrated Conceptual Design Environment for Centrifugal Compressors Flow Path Design

Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition, November 2-6, 2008, Boston, Massachusetts, USA

Advanced Gas Turbine Concept, Design and Evaluation Methodology. Preliminary Design of Highly Loaded Low Pressure Gas Turbine of Engine

Proceedings of the International Gas Turbine Congress 2007 Tokyo December 3-7, 2007

Investigation of a Steam Turbine with leaned blades by Through Flow Analysis and 3D CFD Simulation

International Conference on Power Engineering-2007 October 23-27, 2007, Hangzhou, China

A uniform approach to conceptual design of axial turbine compressor flow path

The Future of Gas Turbine Technology 3rd International Conference 11-12 October 2006, Brussels, Belgium

Axial turbine stages design: 1D/2D/3D simulation, experiment, optimization – design of single stage test air turbine models and validation of 1D/2D/3D aerodynamic computation results against test data.

Proceedings of GT2005 ASME Turbo Expo 2005: Power for Land, Sea and Air June 6-9, 2005, Reno-Tahoe, Nevada, USA

Flow phenomenon in steam turbine disk-stator cavities channeled by balance holes

Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, and Air June 14-17, 2004, Vienna, Austria

Methods and tools for multidisciplinary optimization of axial turbine stages with relatively long blades

Proceedings of ASME Turbo Expo 2004 Power for Land, Sea, and Air June 14-17, 2004, Vienna, Austria

Vibration Analysis of Low Pressure Stages of Large Steam Turbines with ANSYS

Proceedings of 2004 International ANSYS Conference May 24-26, Pittsburgh, PA, USA

Coupled CFD and thermal steady state analysis of steam turbine secondary flow path.

IJPGC 2003 2003 International Joint Power Generation Conference June 16-19, 2003, Atlanta, Georgia, USA